安裝離心風機時應該注意些什麽呢？相信大家對於這個問題也是很感興趣的，那麽接下來離心風機廠家就來為大家講解一下這個問題，就是安裝離心風機的注意事項了，希望本期所講內容能給大家帶來實實在在的幫助。請看下麵的具體講述吧：
What should we pay attention to when installing centrifugal fan? Believe that you are also very interested in this issue, then the centrifugal fan manufacturers will come to you to explain this problem, that is, the installation of centrifugal fan attention, I hope that the content of this issue can bring you real help. See the following details: 1.裝置根基需高岀屋麵,外麵請求工整,以妨滲水漏水,並需預埋好地腳螺稈。
1. The roof of the device needs a high roof, and the outside needs to be neat, so as to prevent water leakage, and the foot screw should be embedded in advance.
2.離心風機底座與根基中間加墊一層5mm橡膠扳,以遞減顫動,地腳螺稈應配有彈簧墊圈,預妨應用時鬆動。
2. A 5 mm rubber wrench is added between the base and the foundation of the centrifugal fan to reduce the vibration. The sole screw should be equipped with a spring washer to loosen the application.
3.調整流轉前應周祥檢測檢查離心風機各零件,翻動葉輪應無卡、擦現像。
3. Before adjusting the flow, Zhou Xiang should inspect the parts of centrifugal fan, and the turning impeller should be free of sticks and scratches.
4.試流轉時檢查葉輪轉動目標是否正確（往下瞧葉輪應逆時針旋）。
4. Check whether the impeller's rotating target is correct (look down at the impeller should be counter-clockwise).
5.試流轉時或者正常應用中應無不同尋常,電壓、電流、顫動、噪音均應該在正常領域內。
5. There should be no difference in the test flow or in the normal application. Voltage, current, flutter and noise should be in the normal field.
6.當風門為電動風門,風機開始時先開風門；停閉時,先停閉風機再停閉風門。
6. When the damper is an electric damper, the fan opens the damper at the beginning; when it stops, the fan stops and then closes the damper.
